JWD1-2.5B/3CG Screw Type Three-Layer Sensor Din Rail TB

Terminal:

It can be mounted on the guide rail .

Grey

JWD1-2.5B/3CG

Blue

JWD1-2.5B/3CG BU

(1) End plate

JWD1-2.5B/3CG-G

JWD1-2.5B/3CG-G BU

(2) Central liaison part:

It is used in the middle of the terminal for horizontal bridging; screw head with 10 insulating rings which can be divided; with 10 screws

ZL6/10

I_max: 26A

(3) Edge liaison part:

Used for bridging between the middle and lower layers of the terminal; separable tooth back insulation

BL 6/2

BL 6/3

BL 6/10

(4) Divider

It is used to separate two adjacent liaison terminal groups and can be inserted after assembly, without any effect on the overall space.

GP-1

(5) Tag:

10 digits; white

ZP6

Thickness / width

[mm]

6.2/62.5

Height (TH 35:7.5 / TH 35:15)

[mm]

67.2/75

Technical data based on IEC/DIN VDE standards

Maximum rated working current / cross-sectional area

[A] / [mm²]

26/4

Maximum cross-sectional area of conductors (rigid / flexible) that can be connected if any edge liaison part is used:

[mm²]

6/4

Rated impulse withstand voltage / degree of pollution

[kV]/-

4.0/3.0

Over-voltage category / insulation material group

-/-

lll/l

Connection capacity

Flexible conductor with tubular bare terminal / tubular pre-insulated terminal

[mm²]

0.25-2.5 / 0.25-2.5

Connection of multiple conductors (two conductors with the same cross-sectional area)

Rigid conductor / flexible conductor

[mm²]

0.2-1 / 0.2-1

Flexible conductor with tubular bare terminal

[mm²]

0.25-1

Flexible conductor with DEV-tubular pre-insulated terminal

[mm²]

0.5-1

Stripping length

[mm]

8

Screw type

M3

Torque

[Nm]

0.6-0.8

Insulation material type

PA

Material flammability according to UL94

V0

Certification data (UL and CAS)

Rated working voltage / rated working current / wire gauge

UL:[V]/[A]/AWG

300/15/30-14