Name: JWD1-2.5B/3CG-LED…/U-O Screw Type Three-Layer Sensor Din Rail TB
Brand: SHANGHAI GKONCY ELECTRIC CO., LTD.

JWD1-2.5B/3CG-LED…/U-O Screw Type Three-Layer Sensor Din Rail TB

Inductive and capacitive three-wire sensors or actuators (such as solenoid valve and motor) have an increasingly broader range of applications in the machinery manufacturing field. Sensor and actuator terminals have the following advantages:

- Significantly lower connection costs by means of potential distribution;

- The edge bridgeware eliminates the need for screws and the time of screw tightening generally required by ordinary terminals;

- The terminals with luminous display are available as expected by customers. The on-off state can be displayed to facilitate troubleshooting;

- Sensor terminals have the same profiles as actuator terminals, so they can be mixed and adjacent to each other.

The terminals with LED are used for PNP or NPN control sensors.

Terminal thickness: 6.2
	Rigid conductor	Flexible conductor	I	Ui
	(mm²)		(A)	(V)
Connection data	0.5-4	0.5-2.5	26	250*
* Voltage subject to the light emitting diode

Description	Color	Type
Terminal: It can be mounted on the guide rail .	Grey
	Blue
Terminal: Same as above, but there is a red (RD) or green (GN) light emitting diode (LED) between the upper and middle layers.	15-30 DC
	15-30 DC
Terminal: Same as above, but there is a red (RD) or green (GN) light emitting diode (LED) between the upper and lower layers.	15-30 DC	JWD1-2.5B/3CG-LED24 RD/U-0
	15-30 DC	JWD1-2.5B/3CG-LED24 GN/U-0
(1) End plate	JWD1-2.5B/3CG-G
(2) Central liaison part: It is used in the middle of the terminal for horizontal bridging; screw head with 10 insulating rings which can be divided; with 10 screws	ZL6/10	I_max: 26A
(3) Edge liaison part: Used for bridging between the middle and lower layers of the terminal; separable tooth back insulation	BL 6/2
	BL 6/3
	BL 6/10
(4) Divider It is used to separate two adjacent liaison terminal groups and can be inserted after assembly, without any effect on the overall space.	GP-1
(4) Quick tag: 10 digits; white	ZP6

Terminal dimensions
Thickness / width / end plate thickness	[mm]	6.2 / 62.5
Height (TH 35:7.5 / TH 35:15 / G 32:15)	[mm]	67.2/75
Technical data based on IEC/DIN VDE standards
Maximum rated working current / cross-sectional area	[A] / [mm²]	26/4
Maximum cross-sectional area of conductors (rigid / flexible) that can be connected if any edge liaison part is used:	[mm²]	6/4
Rated impulse withstand voltage / degree of pollution	[kV]/-	4.0 / 3.0
Over-voltage category / insulation material group	-/-	lll/l
Connection capacity
Flexible conductor with tubular bare terminal / tubular pre-insulated terminal	[mm²]	0.25-2.5/0.25-2.5
Connection of multiple conductors (two conductors with the same cross-sectional area)
Rigid conductor / flexible conductor	[mm²]	0.2-1 / 0.2-1
Flexible conductor with tubular bare terminal	[mm²]	0.25-1
Flexible conductor with DEV-tubular pre-insulated terminal	[mm²]	0.5-1
Stripping length	[mm]	8
Screw type		M3
Torque	[Nm]	0.6-0.8

Insulation material type		PA
Material flammability according to UL94		V0
Certification data (UL and CAS)
Rated working voltage / rated working current / wire gauge	U: [V]/[A]/AWG	300/15/30-14