Email Us
JWD1-6JD Screw Type General Din-RaiL TB

JWD1-6JD Screw Type General Din-RaiL TB

1. Wiring range: 0.2-6mm².

2. Utilizes a screw self-locking principle, featuring high clamping force and maintenance-free operation. This type of terminal block supports multi-wire connections at a single connection point, allowing for wire connection without pretreatment.

3. Enables multi-digit shorting or bridging.

4. Marking strips meet the marking needs of users in different scenarios.

5. Can be used in areas with explosion hazards (according to IEC/EN 60079).

6. Equipped with a grounding pin for rapid grounding.

  • Product Description
  • Parameters
  • Certification
Terminal thickness: 8.2

Rigid conductorFlexible conductor

(mm2)
IEC 60947-7-20.2-100.2-6


Description
Type
Ground Terminal:
The yellow-green insulating housings can be mounted on the mounting rails

JWD1-6 JD
Edge liaison part:
Its role is the same as that of the central liaison part (2); with insulation on the back side; 10 digits that can be further divided at will
2 digitsBL8/2
3 digitsBL8/3
10 digitsBL8/10
Tag:
It can be quickly inserted in the upper grooves on both sides of the terminal as a whole for any identification. It has a total of 10 digits (to be divided at will); it is white.

ZP8


Terminal dimensions
Thickness / width[mm]8.2/42.5
Height (TH 35:7.5 / TH 35:15 / G 32:15)[mm]47/54.5/52
Technical data based on IEC/DIN VDE standards

Rated impulse withstand voltage / degree of pollution[kV]/-45507
Over-voltage category / insulation material group-/-III/I
Connection capacity

Flexible conductor with tubular bare terminal / tubular pre-insulated terminal[mm2]0.25 -6/0.25-6
Connection of multiple conductors (two conductors with the same cross-sectional area)

Rigid conductor / flexible conductor[mm2]0.2 -2.5/0.2-2.5
Flexible conductor with tubular bare terminal[mm2]0.25-1.5
Flexible conductor with DEV-tubular pre-insulated terminal[mm2]0.5-4
Stripping length[mm]10
Screw for terminal position: screw type / torque-/[Nm]M 4/1.5-1.8
Central fastening screw: screw type / torque-/[Nm]M 4/1.5-1.8
Insulation material type
PA
Material flammability according to UL94
V0
Rated working voltage / rated working current / wire gaugeUL:[V]/[A]/AWG-/-/26-8
Note: When an edge liaison part is used, a cable below 1.5 mm2 should be used for a 2.5 mm2 terminal; corresponding cables should be used for terminals with other cross-sectional areas (mm2).


ce
eac
rohs
ul with r certificate
Welcome to consult us for more information!

Leave a message!

*
*
*
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Visit our cookie policy to learn more.
Reject Accept