JWD2-4a/2JD Spring-Cage Double layer Din-Rail TB

The appearance of the JWD2-…JD terminal is consistent with that of the JWD2-… terminal. They are ground terminals.

Insertion of the terminal on the guide rail can ensure correct mechanical and electric connections

The JWD2-…JD can meet all the technical requirements of IEC60947-7-2, especially in the following aspects

– Low contact resistance;

– Corrosion resistance of the contact;

– Yellow + green housing;

– Multiple identification digits

Description		Color	Type
Spring-cage terminal mounted on		Yellow + green	JWD2-4a/2JD
					(1) End plate	Grey	G-D2-4a/2
(2) Plug-in bridgeware used for horizontal connection in the terminal center		2 digits	FBS2-6	lmax:32A
		3 digits	FBS3-6	32A
		4 digits	FBS4-6	32A
		5 digits	FBS5-6	32A
		10 digits	FBS10-6	32A
		20 digits	FBS20-6	32A
(3) Double-tagging bracket inserted in the double-layer spring-cage terminal JWD2…/2, identified with ZP5 and ZBFM5			ZP-a/ZJ2
(4) Screwdriver for spring-cage terminal operation			SZF 1-0.6X3.5
(5) Flat quick designation strip, with 100 digits for lateral identification			ZBFM6
(6) Test plug	Grey

Terminal dimensions
Thickness / length / end plate thickness		[mm]	6.2/83.5/2.2
Height (TH 35:7.5 / TH 35:15)		[mm]	47.5/55
Technical data in accordance with IEC/DIN VDE standards
Maximum rated working current / cross-sectional area		[A] / [mm2]	—
Rated impulse withstand voltage / degree of pollution		[KV] / -	6月3日
Over-voltage category / insulation material group		- / -	III/1
Connection
Stranded wire with tubular pre-insulated terminal		[mm2]	0.25-4
Stranded wire with tubular bare terminal		[mm2]	0.25-4

Stripping length		[mm]	10
Plug gauge (IEC60947-1)			A4
Insulation material			PA
Grading as per UL 94			V0
Certification data (UL and CSA/CUL)
Rated working voltage / rated working current / wire gauge	UL: [V]/[A]/AWG		10月20日
	CSA/CUL: [V]/[A]/AWG