Language

Current Language
    Change Language
    Din-Rail Terminal blocks
    Power Distribution Block Series
    High Current Connectors
    Crimp Connectors
    Heavy Duty Connector
    HomeProductsDin-Rail Terminal blocksPush-In DIN-Rail TBPush-in 1-IN / 2-OUT Din-Rail Terminal blockJWD2-10NZ/1-2 Push-in Din-Rail TB

    Products Category
    JWD2-10NZ/1-2 Push-in Din-Rail TB

    JWD2-10NZ/1-2 Push-in Din-Rail TB

    Share:

    Product Description

    Parameters

    Certification

    Terminal thickness: 10.2
    (IEC)Rigid solidFlexible multi-conductorIUi
    (mm2)(mm2)(A)(V)
    IEC60947-7-1571000
    0.5-160.5-10
    Description Color Type
    In-line spring terminal mounted on Grey JWD2-10NZ/1-2
    Blue
        JWD2-10NZ/1-2BU
    (1) End plate Grey G-D2-10NZ/1-2
    (2) Plug-in bridgeware used for horizontal connection in the terminal center 2 digits FBS2-10 Imax:57A
      3 digits    
      4 digits    
      5 digits    
      10 digits    
      20 digits    
    (3) Conversion bridgeware for connecting JWD2-6NZ to JWD2-2.5NZ or JWD2-4NZ  
    (4) Group partition for terminal group display and electric isolation, with thickness of 2 mm  
    (5) Screwdriver   SZF 3-1.0X5.5
    (6) Quick tag, with 10 digits for identification in the terminal center White ZP10
    (7) Quick designation strip, with 100 digits for lateral identification White ZBFM8
    (8) Test plug Grey  
    Terminal dimensions    
    Thickness / length / height / end plate thickness [mm] 8.2/75.5/42.3/2
    Height (TH35:7.5/TH35:15) [mm] 43.8/51.3
    Connection (directly pluggable)    
    Rigid [mm2] 0.5-10
    Stranded wire with tubular bare terminal or tubular pre-insulated terminal [mm2] 0.5-6
    Stripping length [mm] 12
    Insulation material   PA
    Grading as per UL 94   V0

    Note: Before a stranded wire is used, the tubular bare terminal or tubular pre-insulated terminal should be crimped onto conductors.

    Welcome to consult us for more information!

    Related products