This normally open (NO) relay coupler terminal is based on a small relay and is used as peripheral equipment for process control to ensure the match between level and power. It is practical and easy to use.
Products Category
JWD1-JC 5V DC Normal Open (NO) Relay Terminal
This normally open (NO) relay coupler terminal is based on a small relay and is used as peripheral equipment for process control to ensure the match between level and power. It is practical and easy to use.
Product Description
Parameters
Certification
| Type | |
| JWD1-JC5VDC | |
| Technical Data | |
| Input voltage | 5VDC±10% |
| Input current | About 24 mA |
| Pull-in voltage | ≤ 75% Un |
| Release voltage | ≥ 5% Un |
| Pull-in time | ≤ 8ms |
| Releasing time | ≤ 5ms |
| Maximum output voltage | 250V AC/30V DC |
| Maximum output current | 3A |
| Maximum motion frequency (rated load) | 1200 times/hour |
| Contact material | AgCdo |
| Mechanical life | 2x107 |
| Electrical life | 1x105 |
| Insulation parameter | |
| Coil / contact | 2500V AC |
| Contact / contact (normally open) | 1000V AC |
| Degree of pollution | 2 |
| Cross-sectional area | 0.5 mm2 - 4 mm2 |
| Overall dimensions | |
| Width / thickness / height (mm) | 66/6.2/60 |
| End plate | G-JGD(JC) |
| Edge liaison part | |
| 2 digits | BL6/2 |
| 3 digits | BL6/3 |
| 10 digits | BL6/10 |
Welcome to consult us for more information!
Related products
