JWD1-6JD Screw Type General Din-Rail TB

Inquire Now

Share:

Product Description
Parameters
Certification

Terminal thickness: 8.2
	Rigid conductor	Flexible conductor
	(mm2)
IEC 60947-7-2	0.2-10	0.2-6

Description		Type
Ground Terminal: The yellow-green insulating housings can be mounted on the mounting rails		JWD1-6 JD
Edge liaison part: Its role is the same as that of the central liaison part (2); with insulation on the back side; 10 digits that can be further divided at will	2 digits	BL8/2
	3 digits	BL8/3
	10 digits	BL8/10
Tag: It can be quickly inserted in the upper grooves on both sides of the terminal as a whole for any identification. It has a total of 10 digits (to be divided at will); it is white.		ZP8

Terminal dimensions
Thickness / width	[mm]	8.2/42.5
Height (TH 35:7.5 / TH 35:15 / G 32:15)	[mm]	47/54.5/52
Technical data based on IEC/DIN VDE standards
Rated impulse withstand voltage / degree of pollution	[kV]/-	45507
Over-voltage category / insulation material group	-/-	III/I
Connection capacity
Flexible conductor with tubular bare terminal / tubular pre-insulated terminal	[mm2]	0.25 -6/0.25-6
Connection of multiple conductors (two conductors with the same cross-sectional area)
Rigid conductor / flexible conductor	[mm2]	0.2 -2.5/0.2-2.5
Flexible conductor with tubular bare terminal	[mm2]	0.25-1.5
Flexible conductor with DEV-tubular pre-insulated terminal	[mm2]	0.5-4
Stripping length	[mm]	10
Screw for terminal position: screw type / torque	-/[Nm]	M 4/1.5-1.8
Central fastening screw: screw type / torque	-/[Nm]	M 4/1.5-1.8
Insulation material type		PA
Material flammability according to UL94		V0
Rated working voltage / rated working current / wire gauge	UL:[V]/[A]/AWG	-/-/26-8

Note: When an edge liaison part is used, a cable below 1.5 mm2 should be used for a 2.5 mm2 terminal; corresponding cables should be used for terminals with other cross-sectional areas (mm2).