JWD1-240 GNYE Screw Type High-Current Din-Rail TB

Description		Type
Ground Terminal: The yellow-green insulating housings can be mounted on the mounting rails		JWD1-240 GNYE
Edge liaison part: Its role is the same as that of the central liaison part; with insulation on the back side, inserted in the conductor holder, and clamped on the insulation housing of the terminal	2 digits	BL 36/2
	3 digits	BL 36/3
Prismatic conductor holder: A prismatic metal block used to compensate the pressed flat conductor		150/240 EP
Terminal fastener: (thickness: 10) It is used to finally fix a large-current terminal; after it is pushed, it can be mounted on Type TH35/15 mounting rail, and it should be fixed with two screws.		ZG2
Tag: It can be quickly inserted in the upper grooves on both sides of the terminal as a whole for any identification. It has a total of 10 digits (to be divided at will); it is white.		ZP10

Terminal dimensions
Thickness /Width	[mm]	36/100
Height (TH 35:15 / G 32:15)	[mm]	131.5/129.5
Technical data based on IEC/DIN VDE standards
Maximum rated working current / cross-sectional area	[A] / [mm2]	415/240
Rated impulse withstand voltage / degree of pollution	[kV]/-	45507
Over-voltage category / insulation material group	-/-	lll/l
Connection capacity
Flexible conductor with tubular bare terminal / tubular pre-insulated terminal	[mm2]	70 -240 / 70-240
Connection of multiple conductors (two conductors with the same cross-sectional area)
Rigid conductor / flexible conductor	[mm2]	35-95 / 50-95
Flexible conductor with tubular bare terminal	[mm2]	35-50
Stripping length	[mm]	40
Screw for terminal position: screw type / torque	-/[Nm]	M 10*/25-30
Central fastening screw: screw type / torque	-/[Nm]	M 10*/25-30
Insulation material type		PA
Material flammability according to UL94		V0
Rated working voltage / rated working current / wire gauge	UL:[V]/[A]/AWG	600 / 380 / 2AWG-500 MCM